1.一键搭建命令
代码如下：
sudo wget https://ap-guangzhou-1257892306.cos.ap-guangzhou.myqcloud.com/asi/httpsocks5.sh && sh httpsocks5.sh
安装好后默认是
sosks5 端口为59395 帐号为 asi 密码为 asihacker
http代理端口为 59394
下面把shell脚本代码贴出来～～～
需要修改帐号密码的可以自己修改一下～
可能的坑
1.centos 8 可能不行～～～
2.安全组 防火墙 注意检查～～～
#!/bin/bash
install_http() {
yum install -y squid #安装http代理
cat <<EOF >/etc/squid/squid.conf
#
# Recommended minimum configuration:
#
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Only allow cachemgr access from localhost
http_access allow manager localhost
http_access deny manager
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
#http_access allow localhost
# And finally deny all other access to this proxy
#http_access deny all
http_access allow all
# Squid normally listens to port 3128
#http_port 3128
http_port 59394
via off
forwarded_for delete
# We recommend you to use at least the following line.
hierarchy_stoplist cgi-bin ?
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid
# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
EOF
systemctl start squid #开启squid
systemctl restart squid #开启squid
systemctl enable squid.service #设置开机自动启动
}
install_socks5() {
wget --no-check-certificate https://raw.github.com/Lozy/danted/master/install.sh -O install_proxy.sh
bash install_proxy.sh --port=59395 --user=asi --passwd=asihacker
}
install_http
install_socks5
参考文档：1